@missmaker shows us her summer wardrobe staples!
You may recognise this georgeous fabric from my previous project, this soft drapy cotton viscose from www.samanthaclaridgestudio.com was too beautiful! I just couldn’t tuck it away as a coat lining so I used a small amount for the yoke of the Jade jacket lining and saved the rest for a rather more summery project…
My basic idea was to cut a half circle skirt so the grain of the skirt would run across the bias and drape beautifully with lots of movement. I wanted a full length skirt so measure from my waist to floor then added 4cm to play with. My hip measurement divided by Pi (3.14 – back to school days!) gave me the diameter circle I would need, and as I wanted a half circle I used that as the radius for the waistline instead. To make the very most of the fabric I had to then spread this half circle to give me a slightly flatter curve
I also had some fantastic pale grey cuffing with a coral, pink and white stripe (also available at Sew Crafty) which I though would work perfectly as a comfy waistband, I joined the back seam and sewed the cuffing to the top, marking quarters and stretching the cuffng between to give me a stretchy waistband that still sat beautifully flat with subtle gathers when topstitched with a small zigzag.
A small rolled hem was all that was then needed to complete the skirt, so quick and easy I can see a couple more of these being whizzed up before summer is out!
Then is was on to the top half. I have a New Look pattern (6095) that I have made about 10 different variations of so far.
The fit is fab and actually works perfectly without the zip in the back so I’ve taken to cutting the back as one piece for relaxed fit versions.
I wanted two separate items that came together beautifully as one when needed to, s, once I had the basic shape together I popped it on my dress form with the skirt and thought about the proprtions of the neckline and how bind and finish it.
I opted for a sleaveless look with simple fold over binding, a laced front created using a rectangular facing turned to the outside, topstitched and used button holes with a long rouleux threaded through them (I still might change this to a cord made with emroidery thread matched to the coral stripe of the cuffing but that’s for another day)
TOP TIP: The binding on this top used one of my go to techniques for a lightweight finish. Cut a strip of binding about 5cm wide from the fabric you are using, not on the bias as this is too stretchy but at about 25 degrees. Fold the whole thing in half and press. Place the binding on the wrong side and line up your three raw edges (two for the binding one from the neck or arm hole you are binding). Stitch round the whole thing (folding your ends neatly where they join) Trim the raw edges down to about 0.5cm, fold the entire binding to the outside. Top stitch into place. Supr neat, super light and super strong for this kind of drapey fabric.