@chatterstitch shares her favourite shirt...

 
 
Hi There!
It’s Carol here, aka @Chatterstitch and I really need to tell you, all about my latest make for the Samantha Claridge Design Team!

Why? do I hear you say? Because, I absolutely love it. I requested some of this fabulous Lilac tram stripe cotton to make a Wardrobe By Me, Savannah shirt. The styling of this is so great, very classic and simple but also feminine. It’s a collarless button-down shirt with long sleeves and button cuffs.

I am really enjoying working with natural fibres at the moment especially in this lovely warm weather we are experiencing, well I suppose it is July!

So, this lovely white cotton with its strong lilac stripes was just perfect!

When my fabric first arrived, I machine washed at 40 and then line dried. It washed and pressed like a dream, just as expected from a quality cotton. 

 

What really attracted me to this fabric was the lovely tram stripe and the possibilities it gave me to play around with the stripe direction. The yolk on the savannah pattern is cut on the fold but I really wanted to have the stripes form chevrons at the centre back of the yolk, so I added an extra 1.5cm seam allowance to each centre back seam and cut the yolk as two separate halves. I used my quilting ruler to cut the first half at an angle of 45 degrees and then laid that half over the fabric so I could match the pattern for the other half of the yolk. I think it worked really well but that actually created a different challenge! 

The neck band is cut on the bias, to allow the stretch and curve around the neck, this allows the neckband to lie nice and flat. But, I realised if I cut the neckband as one continuous strip, from the front the diagonal stripe would appear to run in opposite directions, so I decided to also cut the neck band in two sections and then have those chevrons running opposite to the yolk! Yes, I know I just can’t resist the challenge!

I do think however this is one of the main reasons why I have to make my own clothes, I hate seeing people wearing stripes which don’t match or clothes which don’t fit!

I’ve really wanted to try out making my own buttons for such a long time and when I got the opportunity to make some to match my shirt, I just had to try them out. I chose the 11mm plastic ones which come as a six pack.

 

They are so easy to use, you cut a little disk of fabric slightly larger than the front then run a line of gathering stitches around the perimeter. Then pull up the gathers and knot the ends. Once its secure just pop on the little disc which holds it all in place. Et Voila!! 

 

I will definitely use these again and they come in 5 different sizes from 11mm to 38 mm in the nylon (which I used) and also metal ones which come in the same sizes. I’m not exactly sure why you would choose the metal ones over the nylon but on the website the metal ones are recommended for medium weight fabrics, so perhaps with a heavier fabric the metal ones are a bit stronger.

I really like this fabric and I love my new shirt; however, I think the fabric would also make a fabulous top or a shirt dress and there are some great ones around right now!

What would you make?

That’s all from me for now thanks for reading my little post and until next time keep chatting and stitching!

@chatterstitch

Recommended Posts

No comment yet, add your voice below!


Add a Comment

Your email address will not be published. Required fields are marked *