DIY circle bag

Romy's perfect cross body bag!

 
 
Back in the summer I saw a bag for sale on the high street that I really liked. I prefer to have a handbag with a cross body strap and it has to be big enough to fit all my paraphernalia so I was tempted by this one, but at nearly £40 it was a bit pricey.

 

 

So I left it and thought I’d check if it went in the sale, but within a few weeks I found the Everyday Circular Bag on The Makerist for the grand price of $2 (on sale). 

The pattern is pretty much identical to the high street one, so I snapped it up and set about making my first bag!

I used half a metre of the leatherette fabric in black, and got some lobster clips and a zip from eBay. 

 

 

 

Other notions I needed were a leather needle (I used size 100), a walking foot, heavy duty polyester thread (though I used normal thread in the bobbin to reduce bulk) and some wonder clips to keep the pieces together. You can’t really use pins as the holes will permanently mark the fabric. On one occasion I had forgotten my clips and had to make do with hair clips, though they worked pretty well!

 

 

The bag came together fairly easily, although I did have some head scratching due to some mistakes in the pattern. For example, it asks you to cut 2 gusset pieces, but you actually only need 1. The instructions also refer to a Bag Side piece, but this is called the gusset on the pattern piece, so I was looking around for an extra piece that didn’t exist! There is a video to accompany the instructions which is useful, although it doesn’t show the making of the straps and this is the part I had trouble with, as my pieces seemed to look wider than theirs. I’m still not sure why this was but I muddled through and just trimmed an inch off the strap piece to make it fit the lobster clips.

 

 

 

 

 

The fabric sewed well and looks nice and professional with the topstitching:

 

 

 

 

 

You can lightly press the fabric on the wrong side which helps to remove any creases, but you can’t iron the right side or you’ll have a melty mess. I just finger pressed any folds and topstitched to help them lay flat. The trickiest part was sewing in the side pieces as you have to ease the circle in, but with plenty of clips and patience it worked out in the end.

 

 

 

 

I also decided to hack the pattern a little bit to add an inside pocket for my phone so it’s not rattling around inside. The stitching for this is covered by the outside pocket so doesn’t show:

Overall I’m pleased with my bargain, high street-inspired bag, although in hindsight some interfacing would have helped it to hold its shape, as it’s not quite stiff enough. The instructions bizarrely tell you to topstitch each side piece once inserted, which I did for the first piece, but for the second it’s physically impossible as the zip hole isn’t big enough. Another argument for pattern testing! I might try sticking down the seam allowance inside to help stiffen the shape, but might just have to live with it for this one and remember to interface next time. I also decided to lengthen the strap as it was quite short, but this is personal preference.

This fabric is great for bag making and could be used for other accessories too, like purses, toiletries bags and luggage tags. 

That’s all for now, see you again soon for another project!