DIY quilted scissor pouch

I love making useful items for gift giving around this time of year. I wanted to come up with a project for the blog that was sewing themed and would be a great present for a crafty friend…
introducing the DIY scissor pouch!

What you need for this project:

Paper

Pen

Ruler

Scissors – plus the pair you want to make the pouch for!

Main fabric – Treehouse Flying Squirrels by Figo Fabric (pictured below)

Lining fabric –Flower Market Spots cream by ABM  (pictured below)

Batting

Zip (the length of your scissors)

Swivel clip (optional)

Step One:

Lay your chosen scissors onto a piece of paper and leaving a couple of centimetres around the scissors mark a diagonal line.

I have the Fiskars Amplify scissors which are quite big so my height and width measured approx 15.5cm x 30cm for reference.

 

Step Two:

Use something curved to round off the two bottom corners of the pouch template.

Step Three:

Use your template to cut 2 each of main fabric, lining, and batting. The batting I used was an offcut from a quilt I made and is fairly light weight.

Step Four:

Take a piece of main fabric and batting and quilt them together. I did a simple grid pattern with the lines approx 2cm apart and on a diagonal angle but you can do this however you wish or skip this step altogether if you want.

Do the same for the other piece of main fabric and batting and now you have two complete outer pieces.

Step Five:

Now to add the zip! Place the zip face down on one of the main quilted pieces which should be right side up. Then layer on the lining facing down on the zip and stitch in place using a zipper foot.

Step Six:

Repeat step 5 for the opposite side of the zip and then open out both sides, press, and topstitch through all the layers on each side of the zip.

My zip was much longer than the zipper pouch so at this point I trimmed off the excess zip.

Step Seven:

This is an optional step but it makes a handy carrier for the pouch.

Measure a 3″ x 3″ square of fabric. Press a fold down the centre, then open ut and of each side into the centre and press. Topstitch 5mm down each side of the tab and then add on a swivel clip, pin it in place for the next step.

Step Eight:

Add the tab to the right side of the pouch approx 1″ down from the zip and pin/ clip in place

 

Step Nine:

Open your zip to the halfway point and then open out the layers of the pouch. Pin together the two lining pieces right sides facing and do the same with the main pieces right sides facing.

Stitch all the way around leaving a gap of about 3″ in the lining fabric to pull the pouch through after it’s stitched.

Step Ten:

Clip all the curved edges and then pull the pouch through to the right sides. 

Step Eleven:

Carefully poke out all the corners and give it a press then stitch the opening in the lining closed.

Et Voila!

This project is a great stash buster, would make a lovely gift, and would work in all types of woven fabric, you could even try making a faux leather one and omit the lining for a really quick make!

We hope you love this and if you do make one please tag us so we can share it!

Debbie x

#samanthaclaridgestudio

Christmas Crafting! Festive stocking filler purse

Festive purse

We love a quick little sewing project for when you have 5 mins and want to get a quick fix or want to make a handmade gift that doesn’t take too long.

Our quick purse tutorial is perfect for a stocking filler or a unique thoughtful teacher present or secret Santa. It’s a great one for kids or beginners too!

We’ve designed a curved purse but you could easily make this square or oblong, the process is the same.

We used some of the festive fabric we have in stock here

For this project you will need:

Printed out purse template (below)

Main fabric

Lining fabric

7″ zip

Basic sewing kit

Scissors

Step one

Use our template to cut out 2 pieces of main fabric and two of lining fabric.

Step two

Place the zip face down on the right side of the main fabric so the top of the zip lines up with the top edge of the fabric

Step three

Place a lining piece right side down on to the zip so the zip is sandwiched between the main fabric and the lining fabric and pin in place

Using the zipper foot on your sewing machine stitch in place through all the layers.

Open it out, press and then do the same with the other side

Step four

Press both sides and topstitch either side of the zip if you want.

Now open the zip to the halfway point, this is a very important step to help you turn the purse through once it stitched.

Step five

Take the two pieces of main fabric and pin together right sides facing. Do the same with the lining fabric and then stitch all the way around leaving a 2.5″ gap in the lining fabric, at the bottom curved edge, to turn the purse through.

Step six

Turn the purse through the gap you left in the lining and make sure you poke out all the corners,  then stitch the gap closed and give it a final press!

We hope you like our Christmassy projects and we can’t wait to see what you make! Tag us on Instagram if you do make any of these projects or anything with our fabrics!
#samanthaclaridgestudio