How to make a Macrame wall hanging

Macrame is back and we are LOVING it! 

This textile craft based on knotting strings in patterns can be used to make bags, wall hangings, jewellery and plant hangers.

We’ve just had some beautiful Macrame cords and metal hoops delivered, you can find them in the New In section of the shop. So give this cheap and easy craft a go!

Below is a little tutorial to get you started…

Step 1.

I started with one 25m ball of cord and a 20cm hoop in brass. I love the cmbination of this peach cord witht he brass ring 🙂

Firstly cut 9  x 1m strands of cord

Step 2.

Take your first piece of cord, find the middle of the rope. attach to hoop with a larks head knot

Step 3.

Make sure the rope is underneath the hoop and attach with a double half hitch knot.

Step 4.

Then attached a rope either side 

Step 5.

Taking the inner strand wither side create a square knot

Step 6.

Start your knot approx 1.5″ down from the top of the hoop.

Step 7.

Attach the ends to the side of your hoop as in Step 3

Step 8.

Taking the outer strands and create a reverse square knot then attach the ends to the hoop as before

Step 9.

Repeat all steps adding the remaining rope and reversing the square knot each time until you have used all 9 cord stands.  Then trim the ends to form a point.

Et voila!

Fat Quarter Project…

Modern quilt wall hanging...

I’ve had the Figo Fabrics Lucky Charms and Perfect Day Terrazzo in my stash for a couple of months now and have been looking for the perfect sewing project for them. I already blogged a little pin cushion tutorial (read it here!) with part of the white Terrazzo fabric (and still had enough left for this project too…what a win!) A few weeks back I came accross a crochet wall hanging on Pinterest that jumped out at me for it’s geometric design (it sparked all the joy!) I thought it would translate perfectly into a quilt project…so here it is!

I used my trusty cutting mat and rotary cutter plus my handy cutting square which I used to cut my blocks (I simply cut round as it gives nice size block for this project)

I plotted out the pattern…below 

I worked out how many triangles I would need of each colour way and cut out the squares, then cut them in half diagonally and matched them up with their partner! I then laid out the whole quilt and stitched it up row by row, pressing the seams open as I went for a crisp finish.

I used the crosses cotton in grey to back it with as I had it in my stash and it goes nicely with the FIGO Fabrics.

I simply overlocked the two layers together (probably not the proper way to do it but I love using my overlocker as it gives quick and neat results…very satisfying!

I made my own binding out of the left over bits of fabric and I’m so pleased I did as it really ties the whole quilt together so nicely.

I stitched the binding to the back first…then realised I should have done it the other way round so unpicked it (I hadn’t done too much thankfully…no-one likes un-picking lets face it!) and then I stitched the binding to the front then folded it to the back and hand stitched it down.

I like using these little clips for holding the binding in place while I hand stitch so I don’t get pricked when the quilt is in my lap!

So here it is!
 
This project would work brilliantly with any fabrics as long as you have a dark and a light in there for the contrast.
 

Tag us if you make one! #scstudioblog